Cisco 1-Port Gigabit PoE Wireless-AC/N Dual Radio, Dual Band Access Point with PoE
-
$11676
$116.76
Unit price/ per
WAP150-E-K9-EU
| Specifications | Description | |
| Standards | IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) | |
| Ports | LAN Gigabit Ethernet auto-sensing | |
| Cabling type | Category 5e or better | |
| Antennas | Internal antennas optimized for installation on a wall | |
| LED indicators | 1 multifunction LED | |
| Operating system | Linux | |
| Physical Interfaces | ||
| Ports | 10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included) | |
| Buttons | Reset button, power on/off push button | |
| Lock slot | Slot for Kensington lock | |
| LEDs | 1 LED | |
| Physical Specifications | ||
| Physical dimensions (W x D x H) | 5.31 x 5.31x 1.5 in. (135 x 135 x 38 mm) | |
| Weight | 0.77lb or 350g | |
| Network Capabilities | ||
| VLAN support | Yes | |
| Number of VLANs | 1 management VLAN plus 8 VLANs for SSIDs | |
| 802.1X supplicant | Yes | |
| SSID-to-VLAN mapping | Yes | |
| Auto-channel selection | Yes | |
| Spanning tree | Yes | |
| Load balancing | Yes | |
| IPv6 | Yes | |
| ● IPv6 host support | ||
| ● IPv6 RADIUS, syslog, Network Time Protocol (NTP) | ||
| Layer 2 | 802.1Q-based VLANS, 8 active VLANs plus 1 management VLAN | |
| Security | ||
| WPA, WPA2 | Yes, including Enterprise authentication | |
| Access control | Yes, management Access Control List (ACL) plus MAC ACL | |
| Secure management | HTTPS | |
| SSID broadcast | Yes | |
| Rogue access point detection | Yes | |
| Mounting and Physical Security | ||
| Multiple mounting options | Desktop or Wall | |
| Physical security lock | Kensington lock slot | |
| Quality of Service | ||
| QoS | Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS | |
| Performance | ||
| Wireless throughput | Up to 1.2 Gbps data rate (real-world throughput will vary) | |
| Recommended user support | Up to 64 connective users, 10 active users per radio | |
| Multiple-Access Point Management | ||
| Single Point Setup | Yes | |
| Number of access points per cluster | 4 | |
| Active clients per cluster | 120 | |
| Configuration | ||
| Web user interface | Built-in web user interface for easy browser-based configuration (HTTP, HTTPS) | |
| Management | ||
| Management protocols | Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour | |
| Remote management | Yes | |
| Event logging | Local, remote syslog, email alerts | |
| Network diagnostics | Logging and packet capture | |
| Web firmware upgrade | Firmware upgradable through web browser, imported or exported configuration file | |
| Dynamic Host Configuration Protocol (DHCP) | DHCP client | |
| IPv6 host | Yes | |
| HTTP redirect | Yes | |
| Wireless | ||
| Frequency | Dual concurrent radios (2.4 and 5 GHz) | |
| Radio and modulation type | Dual radio, Orthogonal Frequency Division Multiplexing (OFDM) | |
| WLAN | 802.11n/ac | |
| 2x2 Multiple-Input Multiple-Output (MIMO) with 2 spatial streams at 5 GHz | ||
| 2x2 MIMO with 2 spatial streams at 2.4 GHz | ||
| 20-, 40-, and 80-Mhz channels for 802.11ac | ||
| 20- and 40-Mhz for 802.11n | ||
| PHY data rate up to 1.2 Gbps | ||
| 802.11 Dynamic Frequency Selection (DFS) | ||
| Data rates supported | 802.11a/b/g: | |
| ● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps | ||
| ● 802.11n: 6.5 to 300 Mbps | ||
| ◦ 20-MHz bandwidth: MCS 0-15 for supported data rates | ||
| ◦ 40-MHz bandwidth: MCS 0-15 for supported data rates | ||
| ● 802.11ac: 6.5 to 867 Mbps | ||
| ◦ 20-MHz bandwidth: MCS 0-9 for supported data rates | ||
| ◦ 40-MHz bandwidth: MCS 0-9 for supported data rates | ||
| ◦ 80-MHz bandwidth: MCS 0-9 for supported data rates | ||
| Frequency band and operating channels | A/B Regulatory Domain: | C Regulatory Domain: |
| ● 2.412 to 2.462 GHz; 11 channels | ● 2.412 to 2.462 GHz; 11 channels | |
| ● 5.180 to 5.240 GHz; 4 channels | ● 5.180 to 5.240 GHz; 4 channels | |
| ● 5.260 to 5.320 GHz; 4 channels | ● 5.260 to 5.320 GHz; 4 channels | |
| ● 5.500 to 5.700 GHz; 8 channels | ● 5.745 to 5.825 GHz; 5 channels | |
| ● 5.745 to 5.825 GHz; 5 channels | K Regulatory Domain: | |
| E Regulatory Domain: | ● 2.412 to 2.472 GHz; 13 channels | |
| ● 2.412 to 2.472 GHz; 13 channels | ● 5.180 to 5.240 GHz; 4 channels | |
| ● 5.180 to 5.240 GHz; 4 channels | ● 5.260 to 5.320 GHz; 4 channels | |
| ● 5.260 to 5.320 GHz; 4 channels | ● 5.500 to 5.620 GHz; 7 channels | |
| ● 5.500 to 5.700 GHz; 8 channels | ● 5.745 to 5.805 GHz; 4 channels | |
| R Regulatory Domain: | J Regulatory Domain: | |
| ● 2.412 to 2.483.5 GHz; 13 channels | ● 2.400 to 2.483.5GHz; 13 channels | |
| ● 5.150 to 5.250 GHz; 4 channels | ● 5.150 to 5.250 GHz; 4 channels | |
| ● 5.250 to 5.350 GHz; 4 channels | ● 5.250 to 5.350 GHz; 4 channels | |
| ● 5.470 to 5.725 GHz; 11 channels | ||
| Non-overlapping channels | 2.4 GHz | |
| ● 802.11b/g | ||
| ◦ 20 MHz: 3 | ||
| ● 802.11n | ||
| ◦ 20 MHz: 3 | ||
| 5 GHz | ||
| ● 802.11a | ||
| ◦ 20 MHz: 21 | ||
| ● 802.11n | ||
| ◦ 20 MHz: 21 | ||
| ◦ 40 MHz: 9 | ||
| ● 802.11ac | ||
| ◦ 20 MHz: 21 | ||
| ◦ 40 MHz: 9 | ||
| ◦ 80 MHz: 4 | ||
| Wireless isolation | Wireless isolation between clients | |
| External antennas | None | |
| Internal antennas | Internal Fixed Planar Inverted-F Antenna (PIFA) | |
| Antenna gain in dBi | Maximum antenna gain of 3.61 dBi on 2.4 GHz | |
| Maximum antenna gain of 3.85 dBi on 5 GHz | ||
| Wireless Distribution System (WDS) | Yes | |
| Fast roaming | Yes | |
| Multiple SSIDs | 8 | |
| Wireless VLAN map | Yes | |
| WLAN security | Yes | |
| Wi-Fi Multimedia (WMM) | Yes, with unscheduled automatic power save | |
| Operating Modes | ||
| Access point | Access point mode, WDS Bridging, Workgroup Bridge mode | |
| Environmental | ||
| Power options | IEEE 802.3af Ethernet switch | |
| Cisco Power Injector - SB-PWR-INJ2-xx | ||
| AC adapter – SB-PWR-12V/1.5A power adapter in a box | ||
| POE power | ||
| Peak power: 9.5Watts | ||
| Compliance | Safety: | |
| ● UL 60950-1 | ||
| ● CAN/CSA-C22.2 No. 60950-1 | ||
| ● IEC 60950-1 | ||
| ● EN 60950-1 | ||
| Radio approvals: | ||
| ● FCC Part 15.247, 15.407 | ||
| ● RSS-210 (Canada) | ||
| ● EN 300.328, EN 301.893 (Europe) | ||
| ● AS/NZS 4268.2003 (Australia and New Zealand) | ||
| EMI and susceptibility (Class B): | ||
| ● FCC Part 15.107 and 15.109 | ||
| ● ICES-003 (Canada) | ||
| ● EN 301.489-1 and -17 (Europe) | ||
| Operating temperature | 0° to 40°C (32° to 104°F) | |
| Storage temperature | -20° to 70°C (-4° to 158°F) | |
| Operating humidity | 10% to 85% noncondensing | |
| Storage humidity | 5% to 90% noncondensing | |
| System memory | 256 MB RAM | |
| 128 MB flash | ||
| Package Contents | ||
| ● WAP150 Wireless-AC/N Dual Radio Access Point | ||
| ● Power adapter 12V1.5A | ||
| ● Quick-start guide | ||
| ● Ethernet network cable | ||
| Minimum Requirements | ||
| ● Switch or router with PoE support, PoE injector, or AC power adapter | ||
| ● Web-based configuration: Java-enabled web browser | ||
| Warranty | ||
| Access point | Limited lifetime | |
We Also Recommend
Invalid password
Enter